``` 10 x=NEXT #0 ``` which does the same thing! **COPY** *filespec* **TO** *#n* We've seen this command sequence before in a *shortcut* which did not include a stream number but rather a keyword: **SCREEN$**. In that case *n* is the stream to channel **s** which by default is **#2**. When used with a stream number, **COPY...TO #n**, can be used to transfer the contents of a file to a stream. For example to write the extended version of **COPY "c:/readme.md" TO SCREEN$** we should type: ``` COPY "c:/readme.md" TO #2 ``` When *NextBASIC* is running, it has four streams normally open. Streams **#0** and **#1** are connected to the keyboard (channel **k**), and are used by **INPUT** and **INKEY$**. Stream **#2** is connected to the screen (channel **s**), and is used by **PRINT**, **LIST**, **CAT** and **PWD**, commands in other words that print something to the screen. Stream **#3** is connected to the printer (channel **p**), and is used by **LPRINT**, **LLIST** and **COPY** (without parameters). All of these commands can be redirected to use another device by including a **#** followed by an open stream number, so ``` PRINT #1;"This is the lower screen" ``` will print the message on the lower screen while ``` PRINT #3;"Who needs LPRINT, Romulus?" ``` will use the printer. Conversely, **LPRINT** can behave like **PRINT** and typing: ``` LPRINT #2;"Are you confused yet Roy?" ``` makes **LPRINT #2** do what **PRINT** normally does. > **Notes** > > **INPUT #** may be used with other channels other than **k** and **w** such as file(**i**,**o**,**u**), memory (**m**) and variable (**v**) channels. In these cases, it is advisable to avoid any accidental outputs to the channels, by not using any prompt strings, and by using only the semicolon as a separator. In most cases, you will want to input a string using the **LINE** (See *Chapter 14*) modifier as without this, the data in the file (or other channel) would need to be surrounded by quotes. ### The Variable and Memory Channels In the previous chapter, we've examined a special dot command (**.$**) that allowed *NextBASIC* to *talk* to any dot command not made specifically to interact with it. The Variable and Memory Channels can be seen as facilitating the reverse flow of information; to get information from the outside world into *NextBASIC*. They both involve reserving some space beforehand to accept the input but they differ in the sense that the former can be moved anywhere in memory (as variables could be stored anywhere) while the latter is a fixed location (which makes it more suitable for use by machine code programs). You may remember the series of commands we used to get the output of **PWD** in *Chapter 19* or **.time** in *Chapter 17*. Let's remember them quickly: ``` DIM d$(255):OPEN #2,"v>d$":.cd --verbose: CLOSE #2: PRINT d$ ``` and