### Tokens When not used as single symbols, several character codes are used in an alternative manner, where they are called *tokens*, Tokens represent whole words, such as **PRINT**, **STOP**, >=, <>, <= and so on. This is to save space in the machine's main RAM, thus maximising the available program space by substituting multiple character words for single character codes. ### BIN and USR After the graphics symbols, you will see what appears to be another copy of the alphabet from **A** to **U**. These are characters that you can redefine yourself, although when the machine is first switched on they are set as letters – they are called *user-defined* graphics (or UDGs for short). You can type these in from the keyboard by going into graphics mode, and then using the letters keys from **A** to **U**. To define a new character for yourself, follow this recipe – it defines a character to show the mathematical symbol Σ (Greek for Συνολο=*sum*). i. Work out what the character looks like. Each character has an 8x8 square of dots, each of which can show either the paper colour or the ink colour (see *Chapter 15* regarding **INK** and **PAPER**). You'd draw a diagram something like this, with black squares for the ink colour:  We've left a 1 square margin round the edge because the other letters all have one (except for lower case letters with tails, where the tail goes right down to the bottom of the square). ii. Work out which user-defined graphic is to show - let's say the one corresponding to **S**, so that if you press **S** in graphics mode you get Σ on your screen. iii. Store the new pattern. Each *user-defined graphic* has its pattern stored as eight numbers, one for each row. You can write each of these numbers as **BIN** followed by eight **0**s or **1**s – **0** for paper, **1** for ink – so that the eight numbers for our character are: ``` BIN 00000000 BIN 01111100 BIN 00100010 BIN 00010000 ```